OPTICAL NETWORKING & SENSING
PROJECTS
PEOPLE
PUBLICATIONS
PATENTS
Optical Networking & Sensing
We propose a novel optical flow processing technique for distributed temperature and strain sensing with the chirped-pulse coherent OTDR. Unlike conventional 1-dimensional cross-correlation methods, the technique treats the 2-dimensional waterfall data as sequential video frames, estimating local shifts
A 100-meter-long fiber optic cable was installed at the bottom of a water tank at the Davidson Laboratory, together with a hydrophone for reference. The water tank is approximately 2.5 meters deep and 95 meters long; the tank also employs a 6-paddle wavemaker which can generate programmable surface waves.
We propose a novel Distributed Fiber Optic Sensing (DFOS) placement strategy tailored to the evolving needs of modern power grids, where fiber cables serve dual purposes: communication and real-time sensing. Our approach integrates a heuristic algorithm, PURE (Power Source-aware Route Exploration), with
Vector beams are spatial modes that have spatially inhomogeneous states of polarization. Any light beam is a linear combination of vector beams, the coefficients of which comprise a vector beam spectrum. In this work, through numerical calculations, a novel method of free-space optical sensing is
For the first time, we demonstrate remote sensing of pole-mounted fuse-cutout blowing in a power grid setup using telecom fiber cable. The proposed frequency-based AI model achieves over 98% detection accuracy using distributed fiber sensing data.
Our optical networking & sending team has arrived in Frankfurt for the 2024 European Conference on Optical Communication (ECOC) and is excited to present many papers and tutorials this week. Please follow this page and on our social media channels for updates.
The various sensing technologies such as cameras LiDAR radar and satellites with advanced machine learning models offers a comprehensive approach to environmental perception and understanding. This paper introduces an innovative Distributed Fiber Optic Sensing (DFOS) technology utilizing the existing
Our team will be attending CVPR 2024 (The IEEE /CVF Conference on Computer Vision & Pattern Recognition) from June 17-21! See you there at the NEC Labs America Booth 1716! Stay tuned for more information about our participation.
Falling trees or their limbs can cause power lines to break or sag, sometimes resulting in devastating wildfires. Conventional protections such as circuit breakers, overcurrent relays and automatic circuit reclosers may clear short circuits caused by tree contact, but they may not detect cases where
Our Sarper Ozharar, Yue Tian and Yangmin Ding and Jessica L. Ware from the American Museum of Natural History have discovered that fiber optic cables equipped with distributed acoustic sensing (DAS) can pick up the sounds of Brood X cicadas. DAS technology, typically used to monitor seismic activity,
Brood X is the largest of the 15 broods of periodical cicadas, and individuals from this brood emerged across the Eastern United States in spring 2021. Using distributed acoustic sensing (DAS) technology, the activity of Brood X cicadas was monitored in their natural environment in Princeton, NJ. Critical
Sarper Ozharar was awarded an Achievement in Science and Technology Award from Koç University on their notable 30th anniversary. As an alumnus of this esteemed institution, Sarper shared that this recognition is especially meaningful to him, marking a significant milestone in his professional journey.
We present the field trial of an innovative neural network and DAS-based technique, employing a pre-trained CNN fine-tuning strategy for effective rain detection and classification within two practical scenarios.
Utility pole detection and localization is the most fundamental application in aerial-optic cables using distributed acoustic sensing (DAS). The existing pole localization method recognizes the hammer knock signal on DAS traces by learning from knocking vibration patterns. However, it requires many efforts
Distributed Fiber Optic Sensing (DFOS) systems rely on measuring and analyzing different properties of the backscattered light of an optical pulse propagating along a fiber cable. DFOS systems can measure temperature, strain, vibrations, or acoustic excitations on the fiber cable and to their unique
We review sensing fusion results of integrating fiber sensing with video for machine-learning-based localization and classification of impulsive acoustic event detection. Classification accuracy >97% was achieved on aerial coils, and >99% using fiber-based signal enhancers.
Among the power transmission infrastructures, the low-voltage overhead power lines are specifically critical, due to the complicated roadside environments and the significant number of connections to the end utility users. Maintaining of such a large size grid with mostly wood poles is a challenging
For the first time, we demonstrate detection and classification of rain intensity using Distributed Acoustic Sensing (DAS). An artificial neural network was applied for rain intensity classification and high precision of over 96% was achieved.
We report distributed-fiber-optic-sensing results on impulsive acoustic events localization/classification over telecom networks. A deep-learning-based model was trained to classify starter-gun and fireworks signatures with high accuracy of > 99% using fiber-based-signal-enhancer and >97% using aerial
In this manuscript, we propose and experimentally demonstrate a dispersion-controlled optoelectronic oscillator with phase only modulator at 18 GHz. The generated microwave signal has a phase noise of −108 dBc/Hz at 10 kHz offset frequency and the integrated timing jitter is calculated to be 16.2 fs
For the first time to our knowledge, a stationary weight hanging on an operational aerial telecommunication field fiber was detected and localized using only ambient data collected by a φ-DAS system. Although stationary weights do not create temporally varying signals, and hence cannot be observed directly
We demonstrated for the first time to our knowledge, the detection and localization of a static weight on an aerial cable by using frequency domain decomposition analysis of ambient vibrations detected by a φ-DAS system.
In distributed acoustic sensing (DAS) on aerial fiber-optic cables, utility pole localization is a prerequisite for any subsequent event detection. Currently, localizing the utility poles on DAS traces relies on human experts who manually label the poles’ locations by examining DAS signal patterns
We demonstrate fiber optic sensing systems in a distributed fiber sensor network built on existing telecom infrastructure to detect temperature, acoustic effects, vehicle traffic, etc. Measurements are also demonstrated with different network topologies and simultaneously sensing four fiber routes with
