Celso T. do Cabo works at Worcester Polytechnic Institute.

Posts

Finite Element Modeling of Pavement and State Awareness Using Fiber Optic Sensing

A variety of efforts have been put into sensing and modeling of pavements. Such capability is commonly validated with experimental data and used as reference for damage detection and other structural changes. Finite element models (FEM) often provides a high fidelity physics-base benchmark to evaluate the pavement integrity. On the monitoring of roads and pavements in general, FEM combining with in-situ data largely extends the awareness of the pavement condition, and enhances the durability and sustainability for the transportation infrastructures. Although many studies were performed in order to simulate static stress and strain in the pavement, FEM also show potential for dynamic analysis, allowing to extract both frequency response and wave propagation at any location, including the behavior of the soil on the surroundings. Fiber optical sensing is adopted in this research, which outperforms the traditional sensing techniques, such as accelerometers or strain gauges, given its nature of providing continuous measurement in a relatively less intrinsic fashion. Moreover, the data is adopted to validate and calibrate the FEM with complex material properties, such as damping and viscoelasticity of the pavement as well as other nonlinear behavior of the surrounded soil. The results demonstrate a successful FEM with good accuracy of the waveform prediction.

Vibration-Based Status Identification of Power Transmission Poles

Among the power transmission infrastructures, the low-voltage overhead power lines are specifically critical, due to the complicated roadside environments and the significant number of connections to the end utility users. Maintaining of such a large size grid with mostly wood poles is a challenging task and knowing the operating status and its structural integrity drastically speeds up the routine inspection. Applying a data-driven approach using accelerometer data to analyze the power line-induced vibration to classify different poles within different operational conditions is proposed.Feature creation is the important aspect to improve an accuracy of data-driven algorithms. For this purpose, a time-frequency domain classifier is developed, based on the data collected from two tri-axial accelerometers installed on the wood poles before and after streetlights are on. Data are explored both in time and frequency domain using techniques such as data augmentation and segmentation, averaging, filtering, and principal component analysis. Results of the machine learning classifier clearly shows distinct characteristics among the data collected from different work conditions and different poles. Further exploration of the applied algorithm will be pursued to construct more sophisticated features based on supervised learning to enhance the identification accuracy.