Zilong Ye is a former research intern in the Optical Networking and Sensing department at NEC Laboratories America, Inc. and works at California State University.

Posts

Field Implementation of Fiber Cable Monitoring for Mesh Networks with Optimized Multi-Channel Sensor Placement

We develop a heuristic solution to effectively optimize the placement of multi-channel distributed fiber optic sensors in mesh optical fiber cable networks. The solution has beenimplemented in a field network to provide continuous monitoring.

Optical Network Anomaly Detection and Localization Based on Forward Transmission Sensing and Route Optimization

We introduce a novel scheme to detect and localize optical network anomaly using forward transmission sensing, and develop a heuristic algorithm to optimize the route selection. The performance is verified via simulations and network experiments.

Seamless Service Handover in UAV-based Mobile Edge Computing

Unmanned aerial vehicles (UAVs), such as drones, can carry high-performance computing devices (e.g., servers) to provide flexible and on-demand data processing services for theusers in the network edge, leading to the so-called mobile edge computing. In mobile edge computing, researchers have already explored how to optimize the computation offloading and the trajectory planning of UAVs, as well as how to perform the service handover when mobile users move from one location to another. However, there is one critical challenge that has been neglected in past research, which is the limited battery life of UAVs. On average, commercial-level drones only have a battery life of around 30 minutes to 2 hours. As a result, during operation, mobile edge computing carriers have to frequently deal with service handovers that require shifting users and their computing jobs from low-battery UAVs to new fully-charged UAVs. This is the first work that focuses on addressing this challenge with the goal of providing continuous and uninterrupted mobile edge computing service. In particular, we propose a seamless service handover system that achieves minimum service downtime when handling the duty shift between low-battery UAVs and new fullycharged UAVs. In addition, we propose a novel UAV dispatchalgorithm that provides guidelines about how to dispatch new fully-charged UAVs and where to retrieve low-battery UAVs, with the objective of maximizing UAVs’ service time. The effectiveness of the proposed service handover system and the proposed UAV dispatch algorithm is demonstrated through comprehensive simulations using a time-series event-driven simulator.

Availability Analysis for Reliable Distributed Fiber Optic Sensors Placement

We perform the availability analysis for various reliable distributed fiber optic sensor placement schemes in the circumstances of multiple failures. The study can help the network carriers to select the optimal protection scheme for their network sensing services, considering both service availability and hardware cost.

Distributed Fiber Optic Sensors Placement for Infrastructure-as-a-Sensor

Recently, the distributed fiber optic sensing (DFOS) techniques have advanced rapidly. There emerges various types of DFOS sensors that can monitor physical parameters such as temperature, strain, and vibration. With these DFOS sensors deployed, the telecom networks are capable of offering additional services beyond communications, such as monitoring road traffic condition, monitoring utility pole health, monitoring city noise and accident, thus evolving to a new paradigm of Infrastructure-as-a-Sensor (IaaSr) or Network-as-a-Sensor (NaaSr). When telecom network carriers upgrade their infrastructures with DFOS sensors to provide such IaaSr/NaaSr services, there will arise a series of critical challenges: (1) where to place the DFOS sensors, and (2) how to provision the DFOS sensing fiber routes to cover the whole network infrastructures with the minimum number of DFOS sensors? We name this as the DFOS placement problem. In this paper, we prove that the DFOS placement problem is an NP-hard problem, and we analyze the upper bound of the number of DFOS sensors used. To facilitate the optimal solution, we formulate the DFOS placement problem with an Integer Linear Programming model that aims at minimizing the number of DFOS sensors used. Furthermore, we propose a cost-efficient heuristic solution, called Explore-and-Pick (EnP), which can achieve a close-to-optimal performance in a fast manner. We analyze the approximation ratio and the computational complexity of the proposed EnP algorithm. In addition, we conduct comprehensive simulations to evaluate the performance of the proposed solutions. Simulation results show that the EnP algorithm can outperform the baseline algorithm by 16% in average and 26% at best, and it achieves a performance that is close to the optimal result obtained by ILP.

An Efficient Approach for Placing Distributed Fiber Optic Sensors with Concurrent Sensing Capability

We propose an efficient approach for placing distributed fiber optic sensors (DFOS) with concurrent sensing capability. It consumes 5.7% to 9.5% fewer sensors than that using DFOS without concurrent sensing, for covering the same network.

Survivable Distributed Fiber Optic Sensors Placement against Single Link Failure

Empowered by the rapid advancement of fiber optic sensing techniques in recent years, network carriers are able to upgrade their network infrastructure beyond the basic communication services with extra sensing applications and services (e.g., monitoring traffic and road condition, leakage detection, etc.), thus evolving to a new era of Infrastructure-as-a-Sensor (IaaSr) or Network-as-a-Sensor (NaaSr). When network carriers upgrade their network infrastructures with distributed fiber optic sensing (DFOS) technique to provide IaaSr services, there will arise a critical challenge: how to provide survivable (or reliable) IaaSr services against network failures (e.g., fiber cut). In this work, for the first time, we investigate the problem of survivable DFOS placement against single link failure. More specifically, we study where to place the primary and backup sensors and how to assign the primary and backup fiber sensing routes, with the objective of minimizing the number of sensors used. We formulate the problem using Integer Linear Programming (ILP) to facilitate the optimal solution. In addition, we propose a set of efficient heuristic algorithms to solve the problem in a fast manner. In particular, the proposed Shared-one algorithm provides a cost-efficient shared protection, through a one-step global optimization of the assignment of primary and backup DFOS placement. We conduct extensive simulations to evaluate the performance of the proposed solutions. We find out that Shared-one can achieve a close-to-optimal performance, compared to the ILP optimal results, while outperforming the other heuristic solutions with an average performance improvement by at least 16%.

Address Challenges in Placing Distributed Fiber Optic Sensors

We are the first to investigate a novel problem, called distributed fiber optic sensor placement, in the context of Infrastructure-as-a-Sensor. We propose an ILP-based optimal solution and a close-to-optimal heuristic solution, both of which aim at minimizing the cost of sensors.