NEC Laboratories America

Tag Archive for: non interactive beam alignment

You are here: / / non interactive beam alignment

Non-Interactive Beam Alignment refers to when the alignment of a beam is automated or pre-determined, without requiring active manual adjustments from the user in real-time. In this approach, alignment parameters are often set using predefined criteria, algorithms, or sensor feedback, reducing the need for direct user intervention during the alignment process. Non-interactive beam alignment is commonly used in various technological applications where automation and efficiency in the alignment process are prioritized.

Posts

Optimal Single-User Interactive Beam Alignment with Feedback Delay

/in /by

Communication in Millimeter wave (mmWave) band relies on narrow beams due to directionality, high path loss, and shadowing. One can use beam alignment (BA) techniques to find and adjust the direction of these narrow beams. In this paper, BA at the base station (BS) is considered, where the BS sends a set of BA packets to scan different angular regions while the user listens to the channel and sends feedback to the BS for each received packet. It is assumed that the packets and feedback received at the user and BS, respectively, can be correctly decoded. Motivated by practical constraints such as propagation delay, a feedback delay for each BA packet is considered. At the end of the BA, the BS allocates a narrow beam to the user including its angle of departure for data transmission and the objective is to maximize the resulting expected beamforming gain. A general framework for studying this problem is proposed based on which a lower bound on the optimal performance as well as an optimality achieving scheme are obtained. Simulation results reveal significant performance improvements over the state-of-the-art BA methods in the presence of feedback delay.

Read more

On Single-User Interactive Beam Alignment in Millimeter Wave Systems: Impact of Feedback Delay

/in /by

Narrow beams are key to wireless communications in millimeter wave frequency bands. Beam alignment (BA) allows the base station (BS) to adjust the direction and width of the beam used for communication. During BA, the BS transmits a number of scanning beams covering different angular regions. The goal is to minimize the expected width of the uncertainty region (UR) that includes the angle of departure of the user. Conventionally, in interactive BA, it is assumed that the feedback corresponding to each scanning packet is received prior to transmission of the next one. However, in practice, the feedback delay could be larger because of propagation or system constraints. This paper investigates BA strategies that operate under arbitrary fixed feedback delays. This problem is analyzed through a source coding perspective where the feedback sequences are viewed as source codewords. It is shown that these codewords form a codebook with a particular characteristic which is used to define a new class of codes called d—unimodal codes. By analyzing the properties of these codes, a lower bound on the minimum achievable expected beamwidth is provided. The results reveal potential performance improvements in terms of the BA duration it takes to achieve a fixed expected width of the UR over the state-of-the-art BA methods which do not consider the effect of delay.

Read more