Undersea Monitoring refers to using undersea fiber-optic cables to detect and analyze various disturbances, such as phase and polarization shifts, that occur along the cable’s length. These disturbances might be caused by environmental factors, such as seismic activity, ocean currents, or physical strain on the cable due to underwater pressure changes or faults.

Posts

Detection of Waves and Sea-Surface Vessels via Time Domain Only Analysis of Underwater DAS Data

A 100-meter-long fiber optic cable was installed at the bottom of a water tank at the Davidson Laboratory, together with a hydrophone for reference. The water tank is approximately 2.5 meters deep and 95 meters long; the tank also employs a 6-paddle wavemaker which can generate programmable surface waves. A 155-cm-long model boat weighing 6.5 kilograms was automatically dragged on the surface of the tank via an electrical towing mechanism. The movement of the model boat along the fiber cable and over the hydrophone was recorded using a commercially available NEC Distributed Acoustic Sensing (DAS) system and simultaneously by a hydrophone. The experiments were repeated with and without the artificially generated surface waves. The data obtained from the hydrophone and the DAS system are presented and compared. The results show the compatibility between the DAS data and the hydrophone data. More importantly, ourresults show that it is possible to measure the surface waves and to detect a surface vessel approaching the sensor by only using the time domain analysis in terms of detected total energy over time.

Improvement of Resilience of Submarine Networks Based on Fiber Sensing

Simultaneous phase and polarization sensing with span length resolution using the supervisory path is demonstrated. It is shown that by measuring polarization rotation matrix of the return paths, instead of monitoring only the state of polarization, location of the polarization disturbance can be determined even for large polarization rotations. By using the polarization rotation matrices, the phase and polarization disturbances are successfully decoupled. How the existing supervisory system and sensing can coexist in new SDM cables that utilizes pump sharing is discussed.