Mohammad Khojastepour NEC Labs America

Mohammad A. Khojastepour

Senior Researcher

Integrated Systems

Posts

Opportunistic Temporal Fair Mode Selection and User Scheduling for Full-duplex Systems

In-band full-duplex (FD) communications – enabled by recent advances in antenna and RF circuit design – has emerged as one of the promising techniques to improve data rates in wireless systems. One of the major roadblocks in enabling high data rates in FD systems is the inter-user interference (IUI) due to activating pairs of uplink and downlink users at the same time-frequency resource block. Opportunistic user scheduling has been proposed as a means to manage IUI and fully exploit the multiplexing gains in FD systems. In this paper, scheduling under long-term and short-term temporal fairness for single-cell FD wireless networks is considered. Temporal fair scheduling is of interest in delay-sensitive applications, and leads to predictable latency and power consumption. The feasible region of user temporal demand vectors is derived, and a scheduling strategy maximizing the system utility while satisfying long-term temporal fairness is proposed. Furthermore, a short-term temporal fair scheduling strategy is devised which satisfies user temporal demands over a finite window-length. It is shown that the strategy achieves optimal average system utility as the window-length is increased asymptotically. Subsequently, practical construction algorithms for long-term and short-term temporal fair scheduling are introduced. Simulations are provided to verify the derivations and investigate the multiplexing gains. It is observed that using successive interference cancellation at downlink users improves FD gains significantly in the presence of strong IUI.

Beam Training Optimization in Millimeter-wave Systems under Beamwidth, Modulation and Coding Constraints

Millimeter-wave (mmWave) bands have the potential to enable significantly high data rates in wireless systems. In order to overcome intense path loss and severe shadowing in these bands, it is essential to employ directional beams for data transmission. Furthermore, it is known that the mmWave channel incorporates a few number of spatial clusters necessitating additional time to align the corresponding beams with the channel prior to data transmission. This procedure is known as beam training (BT). While a longer BT leads to more directional beams (equivalently higher beamforming gains), there is less time for data communication. In this paper, this trade-off is investigated for a time slotted system under practical constraints such as finite beamwidth resolution and discrete modulation and coding schemes. At each BT time slot, the access point (AP) scans a region of uncertainty by transmitting a probing packet and refines angle of arrival (AoA) estimate based on user equipment (UE) feedback. Given a total number time slots, the objective is to find the optimum allocation between BT and data transmission and a feasible beamwidth for the estimation of AoA at each BT time slot such that the expected throughput is maximized. It is shown that the problem satisfies the optimal substructure property enabling the use of a backward dynamic programming approach to find the optimal solution with polynomial computational complexity. Simulation results reveal that in practical scenarios, the proposed approach outperforms existing techniques such as exhaustive and bisection search.

Robust Beam Tracking and Data Communication in Millimeter Wave Mobile Networks

Millimeter-wave (mmWave) bands have shown the potential to enable high data rates for next generation mobile networks. In order to cope with high path loss and severe shadowing in mmWave frequencies, it is essential to employ massive antenna arrays and generate narrow transmission patterns (beams). When narrow beams are used, mobile user tracking is indispensable for reliable communication. In this paper, a joint beam tracking and data communication strategy is proposed in which, the base station (BS) increases the beamwidth during data transmission to compensate for location uncertainty caused by user mobility. In order to evade low beamforming gains due to widening the beam pattern, a probing scheme is proposed in which the BS transmits a number of probing packets to refine the estimation of angle of arrival based on the user feedback, which enables reliable data transmission through narrow beams again. In the proposed scheme, time is divided into similar frames each consisting of a probing phase followed by a data communication phase. A steady state analysis is provided based on which, the duration of data transmission and probing phases are optimized. Furthermore, the results are generalized to consider practical constraints such as minimum feasible beamwidth. Simulation results reveal that the proposed method outperforms well-known approaches such as optimized beam sweeping.

SkyRAN: A Self-Organizing LTE RAN in the Sky

We envision a flexible, dynamic airborne LTE infrastructure built upon Unmanned Autonomous Vehicles (UAVs) that will provide on-demand, on-time, network access, anywhere. In this paper, we design, implement and evaluate SkyRAN, a self-organizing UAV-based LTE RAN (Radio Access Network) that is a key component of this UAV LTE infrastructure network. SkyRAN determines the UAV’s operating position in 3D airspace so as to optimize connectivity to all the UEs on the ground. It realizes this by overcoming various challenges in constructing and maintaining radio environment maps to UEs that guide the UAV’s position in real-time. SkyRAN is designed to be scalable in that it can be quickly deployed to provide efficient connectivity even over a larger area. It is adaptive in that it reacts to changes in the terrain and UE mobility, to maximize LTE coverage performance while minimizing operating overhead. We implement SkyRAN on a DJI Matrice 600 Pro drone and evaluate it over a 90 000 m2 operating area. Our testbed results indicate that SkyRAN can place the UAV in the optimal location with about 30 secs of a measurement flight. On an average, SkyRAN achieves a throughput of 0.9 – 0.95X of optimal, which is about 1.5 – 2X over other popular baseline schemes.